Ham Radio Signal Reports: RST System Explained for Beginners (What 59 and 599 Mean)
Partager
What Is the RST Signal Report System?
If you've ever listened to a ham radio net or contest, you've probably heard operators exchange cryptic numbers like "59" or "599". These aren't random codes — they're RST signal reports, the universal shorthand hams use to describe how well they're receiving a station.
RST stands for Readability, Strength, and Tone. Each letter gets a number from 1 to 9 (or 1 to 5 for Tone on voice), creating a quick three-digit snapshot of signal quality. Mastering RST is one of the first skills every new ham should learn — it's how you give meaningful feedback and sound like a pro on the air.
RST Breakdown: What Each Digit Means
| Digit | R — Readability | S — Strength | T — Tone (CW/digital) |
|---|---|---|---|
| 1 | Unreadable | Faint — barely perceptible | Extremely rough hiss |
| 2 | Barely readable, occasional words | Very weak | Very rough AC, no musicality |
| 3 | Readable with difficulty | Weak | Rough, low-pitched AC |
| 4 | Readable with practically no difficulty | Fair | Rough note, some filtering |
| 5 | Perfectly readable | Fairly good | Filtered but strong ripple |
| 6 | — | Good | Filtered, slight ripple |
| 7 | — | Moderately strong | Near pure tone, trace ripple |
| 8 | — | Strong | Pure tone, slight modulation |
| 9 | — | Extremely strong | Perfect tone |
"59" vs "599" — Voice vs CW
Here's the most common confusion for beginners:
- On voice (SSB/FM): You only give two digits — Readability and Strength. "59" means "perfectly readable, extremely strong signal." Tone is omitted because voice quality is subjective.
- On CW/Morse code: You give all three digits — Readability, Strength, and Tone. "599" means "perfect copy, booming signal, pure tone."
- On digital modes (FT8, RTTY): Most operators default to "599" since the software decodes perfectly or not at all.
In contests, "59" or "599" is often used as a courtesy even when the signal isn't perfect — it's part of the contest exchange shorthand. Don't be surprised if you hear it constantly during Field Day or CQ WW!
Practical Tips for Giving Accurate Reports
- Trust your ears, not the S-meter. The S-meter shows signal strength, but readability is about how well you can understand the voice. A strong signal can still be unreadable due to noise.
- Be honest on regular QSOs. If someone is 3-by-3 (readable with difficulty, weak signal), tell them. It helps them adjust their antenna or power.
- On repeaters, everyone's "full quieting" — meaning perfectly readable with no noise. A "59" report on a repeater isn't particularly useful; save detailed reports for simplex contacts.
- Practice with a local net. Join a weekly net on your local repeater (simplex if possible) and practice giving real RST reports to different stations.
Get on the Air with a Quality Handheld
Ready to start exchanging signal reports? A good handheld radio is all you need to get started. The QUANSHENG UV-K1(8) is our top pick for beginners — it's affordable, easy to program, and delivers clear audio on both VHF and UHF bands.
For operators who want more power and custom firmware support (including a built-in spectrum analyzer), check out the QUANSHENG UV-K5(99) — the most hackable ham radio under $30.